Mechanical

CEMENT-OPC, PPC & PSC

Sl. No.	Name of test	Test Method	Specification
1	Consistency	IS 4031 P4	IS 269, IS 1489, IS 455, IS 8042
2	Initial and Final Setting time	IS 4031 P5
3	Fineness- By dry sieving	IS 4031 P1
3	Fineness- By Blaines Air Permeability	IS 4031 P2
4	Soundness by Le-Chatelier	IS 4031 P3
4	Soundness by autoclave	IS 4031 P3
5	Density/ Specific Gravity	IS 4031 P11
6	Compressive Strength	IS 4031 P6

FLYASH

Sl. No.	Name of test	Test Method	Specification
1	Initial and Final Setting time	IS 1727	IS 3812
2	Fineness- By dry / wet sieving	IS 1727
2	Fineness- By Blaines Air Permeability	IS 1727
3	Soundness by Le-Chatelier	IS 1727
3	Soundness by autoclave	IS 1727
4	Density/ Specific Gravity	IS 1727
5	Compressive Strength	IS 1727
6	Lime Reactivity	IS 1727

GROUND GRANULATED BLAST FURNACE SLAG (GGBS / GGBFS)

Sl. No.	Name of test	Test Method	Specification
1	Fineness- By Blaines Air Permeability	IS 4031 P2	IS 16714
2	Density/ Specific Gravity	IS 4031 P11
3	Slag Activity Index	IS 4031 P6

SILICA FUME/ MICROSILICA

Sl. No.	Name of test	Test Method	Specification
1	Fineness- By wet sieving	IS 1727	IS 15388
2	Density/ Specific Gravity	IS 1727
3	Compressive Strength	IS 1727

COARSE AGGREGATES

Sl. No.	Name of test	Test Method	Specification
1	Sieve Analysis	IS 2386 P1	IS 383
2	Flakiness Index and Elongation Index	IS 2386 P1
3	Bulk Density (Loose / Rodded)	IS 2386 P2
4	Water Absorption and Specific gravity	IS 2386 P3
5	Moisture Content	IS 2386 P3
6	Impact Value	IS 2386 P4
7	Crushing Value	IS 2386 P4
8	Abrasion Value	IS 2386 P4
9	Ten percent fine values	IS 2386 P4

FINE AGGREGATES / SAND

Sl. No.	Name of test	Test Method	Specification
1	Sieve Analysis	IS 2386 P1	IS 383
2	Particles finer than 75 microns	IS 2386 P1
3	Bulk Density	IS 2386 P2
4	Water Absorption and Specific gravity	IS 2386 P3
5	Moisture Content	IS 2386 P3
6	Bulking of sand	IS 2386 P3

SOIL

Sl. No.	Name of test	Test Method	Specification
1	Particle Size analysis	IS 2720 P4	MoRT&H Specifications
2	Atterbergs Limits- Liquid Limit, Plastic Limit, Plasticity Index	IS 2720 P5
3	Free Swell Index	IS 2720 P40
4	Moisture content	IS 2720 P2
5	OMC- MDD by light compaction	IS 2720 P7
6	OMC- MDD by heavy compaction	IS 2720 P8
7	Lab. CBR (Soaked/ Unsoaked)	IS 2720 P16
8	Direct Shear Test	IS 2720 P13
11	Consolidation Properties	IS 2720 P15

GSB/ WMM/ WBM GRANULAR MATERIAL

Sl. No.	Name of test	Test Method	Specification
1	Sieve Analysis	IS 2720 P4	MoRT&H Specifications
2	Water Absorption	IS 2386 P3
3	Impact Value	IS 2386 P4
4	Abrasion Value	IS 2386 P4
5	Elongation and Flakiness Index	IS 2386 P1
6	Atterbergs Limits- Liquid Limit, Plastic Limit, Plasticity Index	IS 2720 P5
7	Lab. CBR	IS 2720 P16

BITUMEN / ASPHALT

Sl. No.	Name of test	Test Method	Specification
1	Specific Gravity	IS 1202	IS 73, IS 15462
2	Flash Point	IS 1209
3	Softening Point	IS 1205
4	Penetration	IS 1203
5	Ductility	IS 1208
6	Thin Film Oven Test- Loss on heating	IS 1212
7	Thin Film Oven Test- Retained penetration	IS 9382
8	Absolute Viscosity	ASTM D4402
9	Kinematic Viscosity	ASTM D4402
10	Ash Content	IS 1217
11	Elastic Recovery	IS 15462
12	Solubility in trichloro-ethylene	IS 1216

BITUMEN EMULSION

Sl. No.	Name of test	Test Method	Specification
1	Coagulation	IS 8887	IS 8887
2	Miscibility with water	IS 8887
3	Storage Stability	IS 8887
4	Penetration test on residue	IS 1203
5	Ductility test on residue	IS 1208
6	Solubility in trichloro-ethylene of residue	IS 1216

BITUMINOUS MIXES- BC/ BM/ DBM/ MASTIC ASPHALT

Sl. No.	Name of test	Test Method	Specification
1	Extraction Test/ Binder Content	IRS SP 11	MoRT&H Specifications
2	Marshall Stability	ASTM D6927
3	Hardness number of mastic asphalt	IS 1195
3	Extraction Test/ Binder Content of mastic asphalt	IS 1195

CONCRETE

Sl. No.	Name of test	Test Method
1	Mix Design of concrete	IS 10292; IS 456
2	Compressive Strength of Concrete Cube	IS 516 P1- S1
3	Flexural Strength of Concrete beam	IS 516 P1- S1
3	Flexural Strength of Concrete beam	IS 516 P1- S1
4	Compressive Strength of Concrete Core	IS 516 P4
5	"Compressive Strength of Concrete Cube by Accelerated Curing"	IS 9013
6	Water Permeability of concrete	DIN 1048 (P5)
7	Initial Surface absorption	BS 1881(P208)
8	Compressive Strength of concrete cylinder	IS 516 P1- S1
9	Modulus of Elasticity	ASTM C 469
10	Split Tensile Strength	ASTM C 496
10	Shrinkage Test	IS 516 P6
11	Chloride Migration Test	NT Build 492
12	Rapid Chloride ion Penetration Test	ASTM C1202

SOLID CONCRETE BLOCKS

Sl. No.	Name of test	Test Method
1	Compressive Strength	IS 2185 P1
2	Water Absorption	IS 2185 P1
3	Drying Shrinkage	IS 2185 P1
4	Moisture Movement	IS 2185 P1
5	Dimensions & density	IS 2185 P1

BURNT CLAY BRICKS

Sl. No.	Name of test	Test Method	Specification
1	Compressive Strength	IS 3495 P1	IS 1077
2	Water Absorption	IS 3495 P2
3	Efflorescence	IS 3495 P3
4	Dimensions	IS 1077

FLYASH BRICKS

Sl. No.	Name of test	Test Method	Specification
1	Compressive Strength	IS 3495 P1	IS 12894
2	Water Absorption	IS 3495 P2
3	Efflorescence	IS 3495 P3
4	Dimensions	IS 12894

AAC BLOCKS

Sl. No.	Name of test	Test Method	Specification
1	Compressive Strength	IS 6441 P5	IS 2185 P3
2	Moisture Content	IS 6441 P1
3	Drying Shrinkage	IS 6441 P2
4	Dimensions & density	IS 2185 P3
5	Thermal Conductivity	IS 3346

PAVER BLOCKS

Sl. No.	Name of test	Test Method	Specification
1	Compressive Strength	IS 15658	IS 15658
2	Water Absorption	IS 15658
3	Flexural Strength	IS 15658
4	Splitting tensile strength	IS 15658
5	Abrasion test	IS 15658

CONCRETE TILES/ CHEQUERRED TILES/ PAVER TILES

Sl. No.	Name of test	Test Method
1	Wet transverse strength	IS 1237
2	Water Absorption	IS 1237

REINFORCEMENT BARS

Sl. No.	Name of test	Test Method	Specification
1	Mass & Cross Sectional Area	IS 1786	IS 1786
2	Yield Stress	IS 1608 P1
3	Ultimate Tensile Stress	IS 1608 P1
4	Elongation %	IS 1608 P1
5	Bend and Re-bend test	IS 1599

HT WIRE STRAND

Sl. No.	Name of test	Test Method	Specification
1	Length of lay	IS 14268	IS 14268
2	Nominal Diameter	IS 14268
3	Unit Weight	IS 14268
4	Breaking Load	IS 1608 P1
5	0.2% Proof Load	IS 1608 P1

FBEC Bars

Sl. No.	Name of test	Test Method	Specification
1	Coating Thickness Measurement	IS 13620	IS 13620
2	Adhesion of Coating
3	Continuity of Coating

BINDING WIRE

Sl. No.	Name of test	Test Method
1	Tensile Strength	IS 1608 P1
2	Mass of Zinc Coating	IS 6745

Mechanical Coupler Splice

Sl. No.	Name of test	Test Method	Specifications
1	Tensile Strength	IS 1608 P1	IS 16172
2	Elongation
3	Location of fracture

STRUCTURAL STEEL SECTIONS
Angles, Beams, Channels, Plates, Flats, Bars, Tees

Sl. No.	Name of test	Test Method	Specifications
1	Mass & Cross Sectional Area	IS 1608 P1	IS 2062
2	Yield Stress
3	Ultimate Tensile Stress
4	% Elongation
5	Bend test	IS 1599

STEEL TUBES/ PIPES

Sl. No.	Name of test	Test Method	Specifications
1	Ultimate Tensile Stress	IS 1608 P1	IS 1239
2	% Elongation	IS 1608 P1
3	Bend test	IS 2329

SQUARE/ RECTANGULAR PIPES

Sl. No.	Name of test	Test Method	Specifications
1	Mass	IS 4923	IS 4923
2	Yield Stress	IS 1608 P1
3	Ultimate Tensile Stress
4	% Elongation
5	Bend test	IS 1599

WOOD/ TIMBER

Sl. No.	Name of test	Test Method
1	Moisture content	IS 1708 P1
2	Density	IS 1708 P2

PLYWOOD

Sl. No.	Name of test	Test Method	Specifications
1	Moisture content	IS 1734 P1	IS 303 , IS 710
2	Density	IS 1734 P1
3	Glue Adhesion	IS 1734 P4
4	Water Resistance	IS 1734 P6

DOOR SHUTTER

Sl. No.	Name of test	Test Method	Specifications
1	End immersion test	IS 4020 P13	IS 2202
2	Impact indentation test	IS 4020 P5
3	Shock resistance resistance	IS 4020 P8
4	Thickness	IS 4020 P2
5	Dimensions	IS 4020 P2
6	Misuse test	IS 4020 P11
7	Slamming Test	IS 4020 P10
8	Knife Test	IS 4020 P14
9	Glue Adhesion test	IS 4020 P15

CERAMIC TILES

Sl. No.	Name of test	Test Method	Specifications
1	Dimensions	IS 13630 P1	IS 15622
2	Water Absorption	IS 13630 P2
3	Modulus of rupture/ Breaking load	IS 13630 P6
4	Chemical Resistance	IS 13630 P8
5	Scratch hardness	IS 13630 P13

STRUCTURAL GRANITE

Sl. No.	Name of test	Test Method	Specifications
1	Compressive Strength	IS 1121	IS 3316
2	Water Absorption	IS 1124
3	Specific Gravity	IS 1122

ROCK/ BOULDERS

Sl. No.	Name of test	Test Method
1	Uniaxial Compressive Strength	IS 9143
2	Point Load index	IS 8764
3	Specific Gravity	IS 1122
4	Water Content	IS 13630
5	Density	IS 13630
6	Porosity	IS 13630

FIBRE REINFORCED CONCRETE SLAB

Sl. No.	Name of test	Test Method
1	Energy Absorption Capacity	EN 14488-5

EPOXY RESIN BASE BOND SYSTEMS

Sl. No.	Name of test	Test Method
1	Bond Strength	ASTM C882
2	Compressive Strength	ASTM D695
3	Water Absorption	ASTM D570

FLEXIBLE SHEETS/ MEMBRANES FOR WATER PROOFING

Sl. No.	Name of test	Test Method
1	Breaking Strength	ASTM D412/ EN12311
2	Dimensional Stability	ASTM D1204/ EN 1107
3	Elongation	EN12311
4	Extensibility after heat ageing	ASTM C1522
5	Unit Weight	BS EN 1849-2
6	Non Volatile Content	ASTM D1644/ ASTM D6511
7	Peel Adhesion	ASTM C794/ ASTM D903
8	Puncture Resistance	ASTM E154
9	Shear Resistance	EN 12317
10	Tear Strength	ASTM D1004/ EN 12310

GYPSUM PLASTER BOARD

Sl. No.	Name of test	Test Method	Specifications
1	Dimensions	IS 2542 P2	IS 2095
2	Moisture Content	IS 2542 P2
3	Water Absorption	IS 2542 P2

GYPSUM PLASTER

Sl. No.	Name of test	Test Method	Specifications
1	Normal Consistency	IS 2547 P1 S1	IS 2542
2	Setting Time	IS 2547 P1 S3
3	Transvere Strength	IS 2547 P1 S4
4	Compressive Strength	IS 2547 P1 S5
5	Freedom of coarse particles	IS 2547 P1 S8
6	Dry Bulk Density	IS 2547 P1 S12

RCC/ FRP/ CI Manhole Covers / Gratings

Sl. No.	Name of test	Test Method
1	Load Test	IS 12592, IS 1726

WALL PUTTY

Sl. No.	Name of test	Test Method
1	Setting Time	IS 17545
2	Tensile Adhesion Strength	IS 17545
3	Water Retentivity	IS 17545

GEOTEXTILES

Sl. No.	Name of test	Test Method
1	Grab breaking load	ASTM D4632
2	Mass per unit area	IS 14716
3	Static Puncture Resistance	ASTM D6241
4	Trapezoid Tearing Strength	IS 14293
5	Wide Width Tensile Strength	IS 16635

GEOGRIDS

Sl. No.	Name of test	Test Method
1	Rib and Junction thickness	ASTM D5199
2	Single Rib Tensile Strength	ASTM D6637

PARTICLE BOARDS

Sl. No.	Name of test	Test Method
1	Adhesion of plies	IS 1659
2	Density	IS 2380 P3
3	Moisture Content	IS 2380 P3
4	Resistance to Water	IS 1659
5	Swelling	IS 2380 P17
6	Water Absorption	IS 2380 P16

TILE ADHESIVES

Sl. No.	Name of test	Test Method
1	Open Time	IS 15477
2	Adjustment Time	IS 15477
3	Shear Adhesion	IS 15477
4	Slip	IS 15477
5	Tensile Adhesion	IS 15477
6	Transverse Deformation	IS 15477

We Ensure Accuracy & Reliability

What our happy customers are talking

Best experience with testing of construction material and chemicals. Very cooperative, understanding and efficient employees

Jerrin Jose

This laboratory is best of concrete testing this is nabl good service and good behavior every staff and senior person

Anand Kumar

Good place to Test Materials.

Sumeet Kumar Satpathy